ChangeLog/6.1: Difference between revisions

From QEMU
Line 263: Line 263:
=== Testing and CI ===
=== Testing and CI ===


* playbooks for configuring shared gitlab workers are now in {{src:path=scripts/ci/setup}}
* playbooks for configuring shared gitlab workers are now in {{src|path=scripts/ci/setup}}


== Known issues ==
== Known issues ==


* see [[Planning/6.1]]
* see [[Planning/6.1]]

Revision as of 08:23, 16 July 2021

System emulation

Incompatible changes

Consult the 'Removed features' page for details of suggested replacement functionality

  • The 'moxie' target has been removed without replacement. There were no known users of this CPU type anymore and no binaries available which could be used for testing.
  • The 'lm32' target has been removed without replacement. The only public user of this architecture was the milkymist project, which has been completely inactive for years, and there was never an upstream Linux port.
  • The 'unicore32' target has been removed without replacement. Support for this CPU was removed from the upstream Linux kernel a while ago already, and there is no available upstream toolchain to build binaries for it.
  • The 'sheepdog' driver has been removed. The corresponding upstream server project is no longer maintained. Users are recommended to switch to an alternative distributed block device driver such as RBD.
  • The "info cpustats" HMP command has been removed. It already didn't produce output.

New deprecated options and features

Consult the "Deprecated Features" chapter of the QEMU System Emulation User's Guide for further details of the deprecations and their suggested replacements.

  • Using non-persistent backing file with pmem=on is now deprecated

68k

Alpha

Arm

  • New Aspeed machines: rainier-bmc, quanta-q7l1-bmc
  • New npcm7xx machine: quanta-gbs-bmc
  • New Cortex-M3 based machine: stm32vldiscovery
  • Model for Aspeed's Hash and Crypto Engine
  • The mps3-an524 board now supports the alternate memory map (via "-machine remap=QSPI")
  • SVE2 is now emulated, including bfloat16 support
  • FEAT_I8MM is now emulated (integer matrix multiply accumulate)
  • FEAT_TLBIOS is now emulated (TLB invalidate instructions in Outer Shareable domain)
  • FEAT_TLBRANGE is now emulated (TLB range invalidate instructions)
  • FEAT_BF16 and FEAT_AA32BF16 are now emulated (bfloat16 support for AArch64 and AArch32)
  • FEAT_MTE3 (MTE asymmetric fault handling) is now emulated

AVR

Hexagon

HPPA

Microblaze

MIPS

Nios2

OpenRISC

PowerPC

  • With recent enough guests now able to (sometimes) detect hot unplug failures on pseries machine type
  • Greatly increased maximum cpu count for pseries; it's now basically arbitrarily high - you will hit KVM or emulation limits before a fixed cut off
  • Implemented some POWER10 prefixed instructions in TCG
  • Optional support for the H_RPT_INVALIDATE hypercall on pseries machine
  • Experimental "Virtual Open Firmware" option for pseries (and Pegasos2) which implements most of the firmware behaviour inside qemu.
  • Updated ppce500 firmware image, which should fix pci support
  • Added 'pegasos2' machine type emulating the Genesi/bPlan Pegasos II board
  • 'mac99' machine now limited to 2GiB of RAM (previously it was allowed on the command line, although it probably wouldn't work properly)

Renesas RX

Renesas SH

RISC-V

  • Clenaup some left over v1.9 code
  • Documentation improvements
  • Support for the shakti_c machine
  • Internal cleanup of the CSR accesses
  • Updates to the OpenTitan platform
  • Add support for the OpenTitan timer
  • Support for the virtio-vga
  • Fix for the saturate subtract in vector extensions (https://bugs.launchpad.net/qemu/+bug/1923629)
  • Experimental support for the ePMP spec
  • Initial support for the experimental Bit Manip extension
  • Update the PLIC and CLINT DT bindings
  • Improve documentation for RISC-V machines
  • Support direct kernel boot for microchip_pfsoc
  • Fix WFI exception behaviour
  • Improve CSR printing
  • Fix a GDB CSR bug
  • A range of other internal code cleanups and bug fixes

s390x

  • The s390-ccw bios can now be compiled with Clang, too
  • tcg now supports the vector-enhancements facility, and the 'qemu' cpu model has been bumped to a stripped-down z14 GA2
    • this should enable distributions built for the z14 to be run under tcg
  • cpu models for gen16 have been added

SPARC

Tricore

x86

  • New CPU model versions added with XSAVES enabled: Skylake-Client-v4, Skylake-Server-v5, Cascadelake-Server-v5, Cooperlake-v2, Icelake-Client-v3, Icelake-Server-v5, Denverton-v3, Snowridge-v3, Dhyana-v2
  • hv-passthrough won't enable Hyper-V feature flags that are unknown to QEMU
  • New bus-lock-ratelimit machine option for rate limiting bus locks by guests
  • Intel-specific CPUID leaves are not going to be exposed to guests if the vendor ID of the virtual CPU is AMD
  • The fcs:fip and fds:fdp fields of the fstenv and fsave structures are correctly set.

x86_64

  • family/model/stepping of CPU models qemu64 (all accelerators) and max (TCG only) were updated to values corresponding to a 64-bit AMD processor (fixes #191)

Xtensa

Device emulation and assignment

ACPI

Audio

Block devices

Graphics

I2C

  • Modified the I2C base to allow I2C muxes to be added
  • Added support for the pca9546 and pca9548 I2C muxes.
  • Added support for PMBus and several PMBus devices.
  • Move sensor devices into a new sensor directory.
  • Remove the interfaces with the error-prone transfer direction and use the read/write functions instead.

Input devices

IPMI

  • Fixed type of watchdog_expired so vmstate transfer works. Otherwise a vmstate transfer could end up with the wrong data for that field.

Multi-process QEMU

Network devices

NVDIMM

NVMe

Emulated NVMe Controller

PCI/PCIe

SCSI

SD card

SMBIOS

TPM

USB

VFIO

virtio

  • virtio-mem now works with vfio

Xen

fw_cfg

9pfs

  • Reduce latency of Twalk request (directory tree traversal)
  • Fix potential information leak if mtime of export root directory changed (security impact in practice either none or low).

virtiofs

Semihosting

Audio

Character devices

Crypto subsystem

  • The SASL configuration now recommends SCRAM-SHA-256 as the mechanism for simple password authentication
  • Documentation is provided outlining how to use the secret passing features

Authorization subsystem

  • Documentation is provided outlining how to use the authorization framework for access control

GUI

GDBStub

TCG Plugins

  • some memory leaks plugged in example plugins
  • syscall plugin now summarise totals by default (so as not to duplicate -strace)
  • new execlog plugin
  • new cache modelling plugin
  • plugins are enabled by default on most TCG enabled builds

Host support

Memory backends

Migration

Monitor

QMP

HMP

Network

Block device backends and tools

  • Fix a regression in qemu-nbd and qemu-storage-daemon handling file descriptors via socket activation.
  • The NBD client connection code has been refactored to operate as a background task, which in turn allows even better responsiveness in the retry code in dealing with a transient failure connection to a server.
  • qemu-img map --output=json now includes a "present":bool field to facilitate reconstructing which parts of a backing chain are actually present.

Tracing

Miscellaneous

  • The settings for the "-smp" option can be also passed to -M using a "smp." prefix, for example "-smp cpus=4" is now a synonym of "-M smp.cpus=4".

User-mode emulation

binfmt_misc

Hexagon

TCG

  • tricore now has check-tcg support and tests
  • hexagon now has check-tcg support and tests
  • fixed bug in replay HMP commands to accept full length icount
  • plugins enabled by default for most TCG enabled builds

Guest agent

Build Information

  • CentOS 7 is no longer a supported build platform

Python

GIT submodules

Container Based Builds

  • improvements to binfmt_misc containers
  • most ci containers have been regenerated with lcitool

Build Dependencies

  • minimum nettle is now 3.4
  • minimum libgcrypt is now 1.8.0
  • minimum gnutls is now 3.5.18
  • minimum glib is now 2.56
  • minimum gcc is now 7.5.0
  • minimum clang is now 6.0
  • minimum xcode clang is now 10.0
  • minimum libssh is now 0.8.7

Windows

Testing and CI

Known issues