Documentation/Platforms/m68k: Difference between revisions

From QEMU
Line 42: Line 42:
and copy them from the /install/cdrom and /install/kernels folders.
and copy them from the /install/cdrom and /install/kernels folders.


Please note that the instructions below use kernel versions that might have been superseded by newer ones!
Please note that the instructions below use kernel versions that might have been superseded by newer ones on the most recent installation cd images!
During installation on hard disk image the update process might have installed a newer kernel.  
Also, during installation on hard disk image the update process might install a newer kernel.  
Always make sure to extract the latest kernel and initrd.gz from your hard disk image after an update.
Always make sure to extract the latest kernel and initrd.gz from your hard disk image after installation or update and replace the kernel names in the examples below with what is currently installed.


The kernel and the initrd needed to boot might also be found in
The kernel and the initrd needed to boot might also be found in

Revision as of 06:21, 29 April 2021

m68k emulator

The following machines are emulated through qemu-system-m68k:

Machine model selectorProvides
-M an5206 Arnewsh 5206
-M mcf5208evb MCF5208EVB (default)
-M next-cube NeXT Cube
-M none empty machine
-M q800 Macintosh Quadra 800

You can select the desired machine with the -M command line option.

Build directions

 ./configure --target-list=m68k-softmmu && make


Macintoch Quadra 800

Running Linux

Download a m68k distribution, such as debian-10.0-m68k-NETINST-1.iso. Create a hard disk image to install onto.

Debian latest installer CDs are available at: https://cdimage.debian.org/cdimage/ports/

You will need a kernel and initrd to boot Linux. The easiest way to get these is to mount the iso, and copy them from the /install/cdrom and /install/kernels folders.

Please note that the instructions below use kernel versions that might have been superseded by newer ones on the most recent installation cd images! Also, during installation on hard disk image the update process might install a newer kernel. Always make sure to extract the latest kernel and initrd.gz from your hard disk image after installation or update and replace the kernel names in the examples below with what is currently installed.

The kernel and the initrd needed to boot might also be found in https://cdimage.debian.org/cdimage/ports/debian-installer/

If not, you can also extract the installation kernel and initrd from the installation CD:

 guestfish --add debian-10.0-m68k-NETINST-1.iso --ro --mount /dev/sda:/
 <fs> copy-out /install/cdrom/initrd.gz .
 <fs> copy-out /install/kernels/vmlinux-4.16.0-1-m68k .

Or, if you don't want to install guestfish you can use the loop kernel module (but you need to be root):

 sudo modprobe loop
 sudo losetup -f debian-10.0-m68k-NETINST-1.iso
 sudo mount /dev/loop0 /mnt
 cp /mnt/install/cdrom/initrd.gz .
 cp /mnt/install/kernels/vmlinux-4.16.0-1-m68k .
 sudo umount /mnt
 sudo losetup -d /dev/loop0
 

Boot from the CD image:

 ./qemu-system-m68k -boot d \
 -M q800 -serial none -serial mon:stdio -m 1000M \
 -net nic,model=dp83932 -net user \
 -append "console=ttyS0 vga=off" \
 -kernel vmlinux-4.16.0-1-m68k \
 -initrd initrd.gz \
 -drive file=m68k-deb10.qcow2,format=qcow2 \
 -drive file=debian-10.0-m68k-NETINST-1.iso,format=raw,media=cdrom \
 -nographic

Use the following for the source for network-based installation:

 http://ftp.ports.debian.org
 /debian-ports/

After installation, extract the kernel and initrd from the hard disk image;

 guestfish --add m68k-deb10.qcow2 --mount /dev/sda2:/
 <fs>copy-out /boot/vmlinux-4.16.0-1-m68k .
 <fs>copy-out /boot/initrd.img-4.16.0-1-m68k .

If you don't want to install guestfish, you can use the NBD kernel module (but you need to be root):

 sudo rmmod nbd
 sudo modprobe nbd max_part=7
 sudo qemu-nbd -t m68k-deb10.qcow2 -c /dev/nbd0
 sudo mount /dev/nbd0p2 /mnt
 cp /mnt/boot/vmlinux-4.16.0-1-m68k .
 cp /mnt/boot/initrd.img-4.16.0-1-m68k .
 sudo umount /mnt
 sudo qemu-nbd -d /dev/nbd0

To boot from the HD image, you can use:

 ./qemu-system-m68k -boot c \
 -M q800 -serial none -serial mon:stdio -m 1000M \
 -net nic,model=dp83932 -net user \
 -append "root=/dev/sda2 rw console=ttyS0 console=tty \
 -kernel vmlinux-4.16.0-1-m68k \
 -initrd initrd.img-4.16.0-1-m68k \
 -drive file=m68k-deb10.qcow2,format=qcow2 \
 -nographic

Running Mac OS

Note: Mac OS currently will not fully boot on qemu-system-m68k

To boot Mac OS, you need a Macintosh Quadra 800 rom. This rom is found when placed in the pc-bios folder and named MacROM.bin, or can be selected by using the -bios command line option.

 ./qemu-system-m68k -boot d -L pc-bios \
 -M q800 -m 64 \
 -serial stdio \
 -bios Quadra800.rom \
 -cdrom 7.6.iso

The parameter ram (pram) can be saved and loaded from a file:

 -drive file=pram.img,format=raw,if=mtd

Where pram.img is a file of exactly 256 bytes long. You can create such a file with e.g., "dd if=/dev/zero of=pram.img bs=256 count=1" or "qemu-img create -f raw pram.img 256"

How to help

Review the patches that are sent to the QEMU mailing list.

Pictures

Linux Desktop Startup of Linux
Screensaver Web Browser

Links

Maintainer's personal wiki page
68k assembly language tutorial
Quadra 800 specs
Inside Macintosh volumes 1-3
Video of qemu-m68k booting Linux
Video of 24bit GNOME on qemu-system-m68k
Debian m68k port status
Debian m68k port installing tips

Maintainer contact info

Laurent Vivier <laurent@vivier.eu>