Documentation/Platforms/m68k

m68k emulator

The following machines are emulated through qemu-system-m68k:

Machine model selector	Provides
-M an5206	Arnewsh 5206
-M mcf5208evb	MCF5208EVB (default)
-M next-cube	NeXT Cube
-M none	empty machine
-M q800	Macintosh Quadra 800

You can select the desired machine with the -M command line option.

Build directions

 ./configure --target-list=m68k-softmmu && make

Macintoch Quadra 800

Running Linux

Download a m68k distribution, such as debian-10.0-m68k-NETINST-1.iso. Create a hard disk image to install onto.

Debian latest installer CDs are available at: https://cdimage.debian.org/cdimage/ports/

You will need a kernel and initrd to boot Linux. The easiest way to get these is to mount the iso, and copy them from the /install/cdrom and /install/kernels folders.

Please note that the instructions below use kernel versions that might have been superseded by newer ones on the most recent installation cd images! Also, during installation on hard disk image the update process might install a newer kernel. Always make sure to extract the latest kernel and initrd.gz from your hard disk image after installation or update and replace the kernel names in the examples below with what is currently installed.

The kernel and the initrd needed to boot might also be found in https://cdimage.debian.org/cdimage/ports/debian-installer/

If not, you can also extract the installation kernel and initrd from the installation CD:

 guestfish --add debian-10.0-m68k-NETINST-1.iso --ro --mount /dev/sda:/
 <fs> copy-out /install/cdrom/initrd.gz .
 <fs> copy-out /install/kernels/vmlinux-4.16.0-1-m68k .

Or, if you don't want to install guestfish you can use the loop kernel module (but you need to be root):

 sudo modprobe loop
 sudo losetup -f debian-10.0-m68k-NETINST-1.iso
 sudo mount /dev/loop0 /mnt
 cp /mnt/install/cdrom/initrd.gz .
 cp /mnt/install/kernels/vmlinux-4.16.0-1-m68k .
 sudo umount /mnt
 sudo losetup -d /dev/loop0

Boot from the CD image:

 ./qemu-system-m68k -boot d \
 -M q800 -serial none -serial mon:stdio -m 1000M \
 -net nic,model=dp83932 -net user \
 -append "console=ttyS0 vga=off" \
 -kernel vmlinux-4.16.0-1-m68k \
 -initrd initrd.gz \
 -drive file=m68k-deb10.qcow2,format=qcow2 \
 -drive file=debian-10.0-m68k-NETINST-1.iso,format=raw,media=cdrom \
 -nographic

Use the following for the source for network-based installation:

 http://ftp.ports.debian.org
 /debian-ports/

After installation, extract the kernel and initrd from the hard disk image;

 guestfish --add m68k-deb10.qcow2 --mount /dev/sda2:/
 <fs>copy-out /boot/vmlinux-4.16.0-1-m68k .
 <fs>copy-out /boot/initrd.img-4.16.0-1-m68k .

If you don't want to install guestfish, you can use the NBD kernel module (but you need to be root):

 sudo rmmod nbd
 sudo modprobe nbd max_part=7
 sudo qemu-nbd -t m68k-deb10.qcow2 -c /dev/nbd0
 sudo mount /dev/nbd0p2 /mnt
 cp /mnt/boot/vmlinux-4.16.0-1-m68k .
 cp /mnt/boot/initrd.img-4.16.0-1-m68k .
 sudo umount /mnt
 sudo qemu-nbd -d /dev/nbd0

To boot from the HD image, you can use:

 ./qemu-system-m68k -boot c \
 -M q800 -serial none -serial mon:stdio -m 1000M \
 -net nic,model=dp83932 -net user \
 -append "root=/dev/sda2 rw console=ttyS0 console=tty \
 -kernel vmlinux-4.16.0-1-m68k \
 -initrd initrd.img-4.16.0-1-m68k \
 -drive file=m68k-deb10.qcow2,format=qcow2 \
 -nographic

Running Mac OS 7.1 up to 8.1

As of 10-10-2023 you can run Mac OS 7.1 up to 8.1. To boot Mac OS, you need a Macintosh Quadra 800 rom file and an image of a suitable cd rom. The rom is found when placed in the pc-bios folder and is named MacROM.bin, or can be selected by using the -bios command line option.

Parameter ram (pram) can be saved and loaded from a file where pram.img is a file of exactly 256 bytes long. You can create such a file with:

 dd if=/dev/zero of=pram.img bs=256 count=1

or

 qemu-img create -f raw pram.img 256

An empty 2Gb hard disk image can be created with:

 qemu-img create -f raw -o size=2G MacOS81.img

Command line to run Mac OS 8.1:

 ./qemu-system-m68k \
 -M q800 \
 -m 64 \
 -display gtk \
 -bios Quadra800.rom \
 -drive file=pram.img,format=raw,if=mtd \
 -device scsi-cd,scsi-id=3,drive=cd0 \
 -drive file=8.1.iso,format=raw,media=disk,if=none,id=cd0 \
 -device scsi-hd,scsi-id=0,drive=hd0 \
 -drive file=MacOS81.img,format=raw,media=disk,if=none,id=hd0

The -display argument takes either gtk, sdl (best for Windows host) or cocoa (macOS host only) as value.

Running A/UX 3.x

Running NetBSD from a Mac OS installation

You can run NetBSD from a Mac OS installation.

How to help

Review the patches that are sent to the QEMU mailing list.

Pictures

Maintainer contact info

Laurent Vivier <laurent@vivier.eu>