Documentation/Platforms/ARM

From QEMU
Revision as of 14:22, 11 November 2016 by Programmingkid (talk | contribs) (→‎Tips)

QEMU ARM guest support

QEMU has generally good support for ARM guests. It has support for nearly fifty different machines. The reason we support so many is that ARM hardware is much more widely varying than x86 hardware. ARM CPUs are generally built into "system-on-chip" (SoC) designs created by many different companies with different devices, and these SoCs are then built into machines which can vary still further even if they use the same SoC. Even with fifty boards QEMU does not cover more than a small fraction of the ARM hardware ecosystem.

Because ARM systems differ so much and in fundamental ways, typically operating system or firmware images intended to run on one machine will not run at all on any other. This is often surprising for new users who are used to the x86 world where every system looks like a standard PC. (Once the kernel has booted, most userspace software cares much less about the detail of the hardware.)

The situation for 64-bit ARM is fairly similar, except that we don't implement so many different machines.

As well as the more common "A-profile" CPUs (which have MMUs and will run Linux) we also support the Cortex-M3 and Cortex-M4 "M-profile" CPUs (which are microcontrollers used in very embedded boards. We only have two boards which use the M-profile CPU at the moment: "lm3s811evb" and "lm3s6965evb" (which are both TI Stellaris evaluation boards).

Guidelines for choosing a QEMU machine

I have a complete system image already that works on hardware that I'd like to boot with QEMU...
Check whether QEMU lists that machine in its '-machine help' output. If it does, that's the best place to start. If it doesn't then unfortunately you're out of luck: your image won't boot on QEMU. If it's a Linux image and you're mostly interested in the userspace software, then you may be able to extract the filesystem and use that with a different kernel which boots on a system QEMU does emulate.
I don't really care which system I emulate, I just want to run Linux...
Most of the machines QEMU supports have annoying limitations (small amount of RAM, no PCI or other hard disk, etc) which are there because that's what the real hardware is like. If you don't care about reproducing the idiosyncrasies of a particular bit of hardware, the best choice today is the "virt" machine. This is a platform which doesn't correspond to any real hardware and is designed for use in virtual machines. It supports PCI, virtio, recent CPUs and large amounts of RAM. The only thing it doesn't have is graphics. See this tutorial for information on getting 32-bit ARM Debian Linux running on the "virt" board.
For 64-bit ARM "virt" is also the best choice. We don't have a link to a simple tutorial yet, though.
The "versatilepb" machine has also often been used as a general-purpose Linux target in the past; its disadvantage is that it has a very old CPU and only 256MB of RAM, but it does at least have PCI and SCSI. You can find a description of how to install Debian on it here (the author of that tutorial has also provided some prebuilt images). You're probably better off using "virt" though.

Supported Machines

Supported in qemu-system-arm

MachineDescription
akita Sharp SL-C1000 (Akita) PDA (PXA270)
ast2500-evb Aspeed AST2500 EVB (ARM1176)
borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270)
canon-a1100 Canon PowerShot A1100 IS
cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
collie Sharp SL-5500 (Collie) PDA (SA-1110)
connex Gumstix Connex (PXA255)
cubieboard cubietech cubieboard
highbank Calxeda Highbank (ECX-1000)
imx25-pdk ARM i.MX25 PDK board (ARM926)
integratorcp ARM Integrator/CP (ARM926EJ-S)
kzm ARM KZM Emulation Baseboard (ARM1136)
lm3s6965evb Stellaris LM3S6965EVB
lm3s811evb Stellaris LM3S811EVB
mainstone Mainstone II (PXA27x)
midway Calxeda Midway (ECX-2000)
musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
netduino2 Netduino 2 Machine
none empty machine
nuri Samsung NURI board (Exynos4210)
palmetto-bmc OpenPOWER Palmetto BMC (ARM926EJ-S)
raspi2 Raspberry Pi 2
realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
sabrelite Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)
smdkc210 Samsung SMDKC210 board (Exynos4210)
spitz Sharp SL-C3000 (Spitz) PDA (PXA270)
sx1 Siemens SX1 (OMAP310) V2
sx1-v1 Siemens SX1 (OMAP310) V1
terrier Sharp SL-C3200 (Terrier) PDA (PXA270)
tosa Sharp SL-6000 (Tosa) PDA (PXA255)
verdex Gumstix Verdex (PXA270)
versatileab ARM Versatile/AB (ARM926EJ-S)
versatilepb ARM Versatile/PB (ARM926EJ-S)
vexpress-a15 ARM Versatile Express for Cortex-A15
vexpress-a9 ARM Versatile Express for Cortex-A9
virt-2.6 QEMU 2.6 ARM Virtual Machine
virt-2.7 QEMU 2.7 ARM Virtual Machine
virt QEMU 2.8 ARM Virtual Machine (alias of virt-2.8)
virt-2.8 QEMU 2.8 ARM Virtual Machine
xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
z2 Zipit Z2 (PXA27x)


Supported in qemu-system-aarch64

MachineDescription
akita Sharp SL-C1000 (Akita) PDA (PXA270)
ast2500-evb Aspeed AST2500 EVB (ARM1176)
borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270)
canon-a1100 Canon PowerShot A1100 IS
cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
collie Sharp SL-5500 (Collie) PDA (SA-1110)
connex Gumstix Connex (PXA255)
cubieboard cubietech cubieboard
highbank Calxeda Highbank (ECX-1000)
imx25-pdk ARM i.MX25 PDK board (ARM926)
integratorcp ARM Integrator/CP (ARM926EJ-S)
kzm ARM KZM Emulation Baseboard (ARM1136)
lm3s6965evb Stellaris LM3S6965EVB
lm3s811evb Stellaris LM3S811EVB
mainstone Mainstone II (PXA27x)
midway Calxeda Midway (ECX-2000)
musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
netduino2 Netduino 2 Machine
none empty machine
nuri Samsung NURI board (Exynos4210)
palmetto-bmc OpenPOWER Palmetto BMC (ARM926EJ-S)
raspi2 Raspberry Pi 2
realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
sabrelite Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)
smdkc210 Samsung SMDKC210 board (Exynos4210)
spitz Sharp SL-C3000 (Spitz) PDA (PXA270)
sx1 Siemens SX1 (OMAP310) V2
sx1-v1 Siemens SX1 (OMAP310) V1
terrier Sharp SL-C3200 (Terrier) PDA (PXA270)
tosa Sharp SL-6000 (Tosa) PDA (PXA255)
verdex Gumstix Verdex (PXA270)
versatileab ARM Versatile/AB (ARM926EJ-S)
versatilepb ARM Versatile/PB (ARM926EJ-S)
vexpress-a15 ARM Versatile Express for Cortex-A15
vexpress-a9 ARM Versatile Express for Cortex-A9
virt-2.6 QEMU 2.6 ARM Virtual Machine
virt-2.7 QEMU 2.7 ARM Virtual Machine
virt QEMU 2.8 ARM Virtual Machine (alias of virt-2.8)
virt-2.8 QEMU 2.8 ARM Virtual Machine
xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
xlnx-ep108 Xilinx ZynqMP EP108 board
xlnx-zcu102 Xilinx ZynqMP ZCU102 board
z2 Zipit Z2 (PXA27x)

Tips

To see a printout of all the supported machines use:

 qemu-system-arm -M \?

or

 qemu-system-aarch64 -M \?

Picture

Open Source Media Center running in QEMU
Open Source Media Center running in Raspberry Pi target of QEMU

Contacts

Maintainer: Peter Maydell peter.maydell@linaro.org
QEMU ARM developer mailing list page