Documentation/Platforms/PowerPC: Difference between revisions

From QEMU
 
(130 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== PowerPC Macintosh Emulator ==
== PowerPC Emulator (32-bit) ==
=== Description ===
=== Description ===
An emulator of the Apple Beige Power Mac G3 and Sawtooth Power Mac G4.
This page is about qemu-system-ppc.
'''Note''': Information below true for qemu-system-ppc builds as of 14-03-2019 <br>


=== Hardware options ===
The following machines are emulated through qemu-system-ppc:
Recent builds of qemu-system-ppc default to emulating a PowerPC Mac G4, Mac Model PowerPC3,1. <br>
The machine model selector on the command line (-m) has three options:


<table>
<table>
Line 12: Line 11:
</tr>
</tr>
<tr>
<tr>
<td>-m mac99,via=pmu </td><td>pmu power management, providing USB mouse and keyboard (this is the default)</td>
<td>-M g3beige </td><td>Heathrow based PowerMAC (default)</td>
</tr>
</tr>
<tr>
<tr>
<td>-m mac99,via=pmu-adb </td><td>pmu power management with adb bus for older OSs not supporting USB</td>
<td>-M mac99 </td><td>Mac99 based PowerMAC<tr>
</tr>
</tr>
<tr>
<tr>
<td>-m mac99,via=cuda </td><td>cuda power management with adb bus, not well supported</td>
<td>-M 40p </td><td>IBM RS/6000 7020 (40p)</td>
</tr>
<tr>
<td>-M bamboo </td><td>Bamboo</td>
</tr>
<tr>
<td>-M mpc8544ds </td><td>Mpc8544ds</td>
</tr>
<tr>
<td>-M none </td><td>Empty machine</td>
</tr>
<tr>
<td>-M ppce500 </td><td>Generic paravirt e500 platform</td>
</tr>
<tr>
<td>-M prep </td><td>PowerPC PREP platform (deprecated in favour of the 40p machine )</td>
</tr>
<tr>
<td>-M ref405ep </td><td>Ref405ep</td>
</tr>
<tr>
<td>-M amigaone </td><td>Eyetech AmigaOne/Mai Logic Teron</td>
</tr>
<tr>
<td>-M sam460ex </td><td>aCube Sam460ex</td>
</tr>
<tr>
<td>-M virtex-ml507 </td><td>Xilinx Virtex ML507 reference design</td>
</table>
 
=== Build directions ===
  ./configure --target-list=ppc-softmmu && make
Due to mouse issues when using the default GTK GUI in Windows, it is advisable to use the SDL-based GUI when compiling on/for that platform:
  ./configure --target-list=ppc-softmmu --enable-sdl && make
 
=== Pre-built binaries for Windows and OSX ===
Pre-built binaries for Windows can be found here: https://qemu.weilnetz.de/w64/ <br>
Pre-built binaries for OSX are provided at the emaculation website: https://www.emaculation.com/forum/viewtopic.php?f=34&t=8848 <br>
Experimental builds for Windows/OSX with e.g., sound support are provided at the emaculation website: https://www.emaculation.com/forum/viewtopic.php?f=34&t=8848&p=52102#p52104 and here: https://www.emaculation.com/forum/viewtopic.php?f=34&t=9028
 
=== Additional guides ===
Some guides detailing running Mac OS/ OS X or Amiga-like OSes are available off-site:<br>
https://www.emaculation.com/doku.php/qemu/ <br>
http://zero.eik.bme.hu/~balaton/qemu/amiga/
 
=== PowerMac G4 and G3 emulation ===
 
PowerPC Mac G4 (Mac Model PowerPC3,1) and PowerPC Mac G3 emulation<br>
 
The PowerPC Mac G4 -m mac99 machine model selector has three options:
 
<table>
<tr style="text-decoration:underline;">
<td width=300px>Machine model selector options</td><td>Provides</td>
</tr>
<tr>
<td>-M mac99,via=pmu </td><td>pmu power management, providing USB mouse and keyboard</td>
</tr>
<tr>
<td>-M mac99,via=pmu-adb </td><td>pmu power management with adb bus for older OSs not supporting USB</td>
</tr>
<tr>
<td>-M mac99,via=cuda </td><td>cuda power management with adb bus (this is the default)</td>
</tr>
</tr>
</table>
</table>
Line 35: Line 96:
</tr>
</tr>
<tr>
<tr>
<td>-prom-env "vga-ndrv?=true" </td><td>yes</td><td>On the fly resolution/colour depth switching for MacOS/OS guests<td>
<td>-prom-env "vga-ndrv?=true" </td><td>yes</td><td>On the fly resolution/colour depth switching for Mac OS/OS X guests<td>
</tr>
<tr>
<td>-device VGA,edid=on </td><td>no</td><td>Provides additional screen resolutions for Mac OS/OS X guests<td>
</tr>
</tr>
</table>
</table>


=== Guest compatibility ===
==== Mac OS/OSX and Linux guest compatibility ====
Note: information true for qemu-system-ppc builds as of 23-06-2018 <br>
 
<table>
<table>
<tr style="text-decoration:underline;">
<tr style="text-decoration:underline;">
Line 49: Line 113:
</tr>
</tr>
<tr>
<tr>
<td>Mac OS 9.0</td><td>Boots, installs, runs</td><td>Requires 9.0.4 with rom version 5.6 and above (e.g., 9.0.4 for the Cube)</td>
<td>Mac OS 9.0</td><td>Boots, installs, runs</td><td>Requires 9.0.4 with rom version 5.2.1 and above (e.g., 9.0.4 for the Cube)</td>
</tr>
</tr>
<tr>
<tr>
Line 73: Line 137:
</tr>
</tr>
<tr>
<tr>
<td>Mac OS 10.5</td><td>Boots, installs, runs</td>
<td>Mac OS 10.5</td><td>Boots, installs, runs</td><td>Requires -m mac99,via=pmu to run</td>
</tr>
</tr>
<tr>
<tr>
Line 89: Line 153:
<tr>
<tr>
<td>OpenSuse 11</td><td>Boots, installs, runs</td><td>Requires -device rtl8139 for networking, -g 1024x768x8 to see text while installing</td>
<td>OpenSuse 11</td><td>Boots, installs, runs</td><td>Requires -device rtl8139 for networking, -g 1024x768x8 to see text while installing</td>
</tr>
<tr>
<td>Yellow Dog Linux 6.2</td><td>Boots, installs, runs</td><td>Requires -device rtl8139 for networking, -g 1024x768x8 to see text while installing</td>
</tr>
</tr>
</table>
</table>


=== Build directions ===
==== Guest installation instructions ====
  ./configure --target-list=ppc-softmmu && make
Due to mouse issues when using the default GTK gui, it is advisable to use the SDL-based GUI:
  ./configure --target-list=ppc-softmmu --enable-sdl --with-sdlabi=2.0 && make
 
=== Pre-built binaries for Windows and OSX ===
Pre-built binaries for Windows can be found here: https://qemu.weilnetz.de/w64/ <br>
Pre-built binaries for OSX are provided at the emaculation website: https://www.emaculation.com/forum/viewtopic.php?f=34&t=8848 <br>
Experimental builds for Windows/OSX with e.g., sound support are provided at the emaculation website: https://www.emaculation.com/forum/viewtopic.php?f=34&t=8848&p=52102#p52104 and here: https://www.emaculation.com/forum/viewtopic.php?f=34&t=9028


== Guest installation instructions ==
==== Mac OS 9.x to Mac OS X 10.4 ====
Command-line options to install Mac OS:<br>
  ./qemu-system-ppc -L pc-bios -boot d -M mac99 -m 512 -hda <hd image file> -cdrom <iso file of installation media>


=== Mac OS/Mac OSX ===
Command-line options to run Mac OS:<br>
  ./qemu-system-ppc -L pc-bios -boot c -M mac99 -m 512 -hda <hd image file>


==== Mac OS 9.x ====
==== Mac OS X 10.5 ====
Command-line options to install Mac OS 9:<br>
Command-line options to install Mac OS X 10.5:<br>
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -hda <hd image file> -cdrom <iso file of installation media> -netdev user,id=mynet0 -device sungem,netdev=mynet0
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -hda <hd image file> -cdrom <iso file of installation media>


==== Mac OS 10.X ====
Command-line options to run Mac OS X 10.5:<br>
Command-line options to install Mac OS 10.X:<br>
   ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 512 -hda <hd image file>
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -hda <hd image file> -cdrom <iso file of installation media> -netdev user,id=mynet0 -device sungem,netdev=mynet0


==== Mac OS X Server 1.2v3 ====
==== Mac OS X Server 1.2v3 ====
Installation requires several steps: <br>
Installation requires several steps. Only use an .img HD, qcow2 will not work: <br>
Step 1: boot from installation CD, use disk utility to partition disk as Apple Server, quit Qemu and reboot with command line in step 2.
Step 1: boot from installation CD, use disk utility to partition disk as Apple Server, start the installation and let it fail. Quit Qemu and reboot with command line in step 2.
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu-adb -m 256 -net none -prom-env "auto-boot?=true" -prom-env "vga-ndrv?=true" -prom-env "boot-args=-v" -sdl -cdrom OSXServer1.2v3.iso -hda OSXServer1.2v3.qcow2
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu-adb -m 256 -net none -prom-env "auto-boot?=true" -prom-env "boot-args=-v" \
  -cdrom OSXServer1.2v3.iso -hda OSXServer1.2v3.img


Step 2: initial installation (note machine and CPU, otherwise no desktop is shown).  
Step 2: initial installation (note machine and CPU, otherwise no desktop is shown).  
   ./qemu-system-ppc -L pc-bios -boot d -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=false" -net none -sdl -hda OSXServer1.2v3.qcow2 -cdrom OSXServer1.2v3.iso
   ./qemu-system-ppc -L pc-bios -boot d -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=false" -net none \
  -hda OSXServer1.2v3.img -cdrom OSXServer1.2v3.iso


At the boot prompt enter "boot cd:9,\\:tbxi" Initial installation starts. Quit Qemu after completion.
At the boot prompt enter "boot cd:9,\\:tbxi" Initial installation starts. Quit Qemu after completion.


Step 3: Installation continued. Boot with the following command line to complete the installation.
Step 3: Installation continued. Boot with the following command line to complete the installation.
   ./qemu-system-ppc -L pc-bios -boot c -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none -sdl -hda OSXServer1.2v3.qcow2 -cdrom OSXServer1.2v3.iso
   ./qemu-system-ppc -L pc-bios -boot c -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none \
  -hda OSXServer1.2v3.img -cdrom OSXServer1.2v3.iso


Step 4: Boot the installed system:  
Step 4: Boot the installed system:  
   ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu-adb -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none -sdl -hda OSXServer1.2v3.qcow2 -cdrom OSXServer1.2v3.iso
   ./qemu-system-ppc -L pc-bios -boot c -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none \
 
  -hda OSXServer1.2v3.img -cdrom OSXServer1.2v3.iso
=== 32 Bit PowerPC Linux  ===


==== Lubuntu 14 ====
==== Lubuntu 14 ====
Installation:
Installation:
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda lubuntu14.qcow2 -cdrom lubuntu-14.04.5-desktop-powerpc.iso
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
  -hda lubuntu14.qcow2 -cdrom lubuntu-14.04.5-desktop-powerpc.iso


Running:  
Running:  
   ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda c:\Linux-disks\lubuntu14.qcow2 -cdrom c:\Linux-images\lubuntu-14.04.5-desktop-powerpc.iso
   ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
  -M mac99,via=pmu -m 1024 -hda lubuntu14.qcow2


==== Fedora 12 ====
==== Fedora 12 ====
Installing:
Installing:
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda fedora12.qcow2 -cdrom Fedora-12-ppc-DVD.iso -g 1024x768x16  
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
  -hda fedora12.qcow2 -cdrom Fedora-12-ppc-DVD.iso -g 1024x768x16  
Running:  
Running:  
   ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda fedora12.qcow2 -g 1024x768x32
   ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
  -M mac99,via=pmu -m 1024 -hda fedora12.qcow2 -g 1024x768x32


==== Debian 10 (Buster) ====
==== Debian 10 (Buster) ====
Note: To get a graphical desktop, at software selection, remove the default desktop environment and install only Xfce<br>
Note: To get a graphical desktop, at software selection, remove the default desktop environment and install only Xfce<br>
Installing:
Installing:
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda debian10.qcow2 -cdrom debian-10.0-powerpc-NETINST-1.iso -g 1024x768x8
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
  -hda debian10.qcow2 -cdrom debian-10.0-powerpc-NETINST-1.iso -g 1024x768x8
Running:
Running:
   ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda debian10.qcow2 -g 1024x768x32
   ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
  -M mac99,via=pmu -m 1024 -hda debian10.qcow2 -g 1024x768x32


At the boot prompt enter "Linux modprobe.blacklist=bochs_drm" <br>
At the Linux boot prompt enter "Linux modprobe.blacklist=bochs_drm" <br>


Pre-installed images of Debian 6 (Squeeze) and 7 (Wheezy) (both minimal and with desktop) can be found here: https://people.debian.org/~aurel32/qemu/powerpc/
Pre-installed images of Debian 6 (Squeeze) and 7 (Wheezy) (both minimal and with desktop) can be found here: https://people.debian.org/~aurel32/qemu/powerpc/


These images boot with:
These images boot with:
   ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -hda debian_wheezy_powerpc_desktop.qcow2 -g 1024x768x32 -sdl
   ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 1024 \
  -hda debian_wheezy_powerpc_desktop.qcow2 -g 1024x768x32


==== OpenSuse 11 ====
==== OpenSuse 11 ====
Installing: <br>
Installing: <br>
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -net nic,model=rtl8139 -net user -sdl -hda opensuse11.qcow2 -cdrom opensuse11.iso -g 1024x768x8
   ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -net nic,model=rtl8139 \
  -net user -hda opensuse11.qcow2 -cdrom opensuse11.iso -g 1024x768x16


Once the license screen appears, press Ctrl-Alt-Shift-X to open a terminal. Follow https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer to create partitions with pdisk. Write the map after partitioning and continue with Yast. Once Yast arrives at partitioning, select Expert partitioning, select the Hard disk and click Rescan disk.
Once the license screen appears, press Ctrl-Alt-Shift-X to open a terminal. Follow https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer to create partitions with pdisk. Write the map after partitioning and continue with Yast. Once Yast arrives at partitioning, select Expert partitioning, select the Hard disk and click Rescan disk.
Line 171: Line 242:


Accept the partitioning and continue with formatting. Continue installing. There will be an error while the boot manager is being installed. Ignore it, do not retry and wait for the installation to finish and the system reboots. Quit Qemu at the openbios screen and edit your command line:
Accept the partitioning and continue with formatting. Continue installing. There will be an error while the boot manager is being installed. Ignore it, do not retry and wait for the installation to finish and the system reboots. Quit Qemu at the openbios screen and edit your command line:
   ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 512 -net nic,model=rtl8139 -net user -sdl -hda opensuse11.qcow2 -cdrom opensuse11.iso -g 1024x768x32
   ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 512 -net nic,model=rtl8139 \
  -net user -hda opensuse11.qcow2 -cdrom opensuse11.iso -g 1024x768x32
 
==== Yellow Dog Linux 6.2 ====
Installing: <br>
  ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
  -netdev user,id=network01 -device rtl8139,netdev=network01 \
  -cdrom <installation-image> -hda <hard disk image> -g 1024x768x16
 
Running: <br>
  ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 1024 \
  -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
  -netdev user,id=network01 -device rtl8139,netdev=network01 \
  -hda <hard disk image> -g 1024x768x16
 
=== IBM RS/6000 7020 (40p) ===
 
The 40p machine can be booted with the sandalfoot zImage from:
http://www.juneau-lug.org/zImage.initrd.sandalfoot
 
Booting:
  ./qemu-system-ppc -M 40p -cdrom zImage.initrd.sandalfoot -boot d
 
<!-- Booting AIX 5.1 (will become available in Qemu 4.1, take q40pofw-serial.rom from https://github.com/artyom-tarasenko/openfirmware/releases/download/20190406-AIX-boots/q40pofw-serial.rom) qemu-system-ppc -M 40p -bios q40pofw-serial.rom -serial telnet::4441,server -hda aix-hdd.qcow2 -cdrom \
/path/to/aix-5.1-cd1.iso  -vga none -nographic -->
 
=== Bamboo ===
 
  ./qemu-system-ppc -m bamboo
 
=== Mpc8544ds ===
 
  ./qemu-system-ppc -m mpc8544ds
 
=== Empty machine ===
 
  ./qemu-system-ppc -m none
 
=== Generic paravirt e500 platform ===
 
  ./qemu-system-ppc -m ppce500


== Mac OS 9 Debugging tips ==
=== PowerPC PREP platform (deprecated in favour of the 40p machine) ===
Macsbug can be used to tell you what exactly stopped booting. The link for it is below.<BR>
 
  ./qemu-system-ppc -m prep
 
=== Ref405ep ===
 
  ./qemu-system-ppc -m ref405ep
 
=== Eyetech AmigaOne/Mai Logic Teron ===
 
The AmigaNG boards (amigaone, pegasos2, sam460ex) are primarily used for running Amiga-like OSes (AmigaOS 4, MorphOS and AROS) but these can also run Linux.
 
Eyetech AmigaOne/Mai Logic Teron (amigaone)
The amigaone machine emulates an AmigaOne XE mainboard by Eyetech which is a rebranded Mai Logic Teron board with modified U-Boot firmware to support AmigaOS 4.
 
Emulated devices:
* PowerPC 7457 CPU (can also use``-cpu g3, 750cxe, 750fx`` or ``750gx``)
* Articia S north bridge
* VIA VT82C686B south bridge
* PCI VGA compatible card (guests may need other card instead)
* PS/2 keyboard and mouse
 
To boot, a modified U-Boot binary is needed. While released under GPL, its source is lost so it cannot be included in QEMU.
A binary is available at https://www.hyperion-entertainment.com/index.php/downloads?view=files&parent=28.
The ROM image is in the last 512kB of the file, which, on a linux host, can be extracted with the command:
 
  tail -c 524288 updater.image > u-boot-amigaone.bin
 
The BIOS emulator in the firmware is unable to run QEMU‘s standard vgabios so VGABIOS-lgpl-latest.bin is needed instead.
This can be downloaded from http://www.nongnu.org/vgabios.
 
You can find some Linux images that work on the amigaone machine at the following link:
https://sourceforge.net/projects/amigaone-linux/files/debian-installer/
 
Booting:
 
  ./qemu-system-ppc -machine amigaone -bios u-boot-amigaone.bin \
  -cdrom "A1 Linux Net Installer.iso" \
  -device ati-vga,model=rv100,romfile=VGABIOS-lgpl-latest.bin
 
From the firmware menu that appears select Boot sequence, Amiga Multiboot Options and set Boot device 1 to Onboard VIA IDE CDROM.
Then hit escape until the main screen appears, hit escape once more and from the exit menu select either Save settings and exit or Use settings for this session only.
It may take a long time loading the kernel into memory but eventually it boots and the installer becomes visible.
The ati-vga RV100 emulation is not complete yet so only frame buffer works, DRM and 3D is not available.
 
=== aCube Sam460ex ===
 
Booting:
  ./qemu-system-ppc -machine sam460ex -rtc base=localtime \
  -drive if=none,id=cd,file=Sam460InstallCD-53.58.iso,format=raw \
  -device ide-cd,drive=cd,bus=ide.1
 
=== Xilinx Virtex ML507 reference design ===
 
  ./qemu-system-ppc -m virtex-ml507
 
== Debugging tips ==
=== Command line options ===
  -d unimp,guest_errors
(logs unimplemented features and guest errors to stdout)
 
  -trace 'pmu_*'
(logs all PMU accesses to stdout)
 
  -trace 'usb*'
(logs all USB accesses to stdout)
 
=== Macsbug ===
Macsbug can be used with Mac OS guest to tell you what exactly stopped booting. The link for it is below.<BR>
Mac OS 9.2 comes with a built-in debugger. To use it, set the OpenBIOS variable &#147;APPL,debug&#148;:<BR>
Mac OS 9.2 comes with a built-in debugger. To use it, set the OpenBIOS variable &#147;APPL,debug&#148;:<BR>
<BR>
<BR>
Via QEMU's command-line options:<br>
Via QEMU's command-line options:<br>
   -prom-env aapl,debug=2000000<br>
   -prom-env aapl,debug=2000000
In OpenBIOS type:<BR>
In OpenBIOS type:<BR>
dev /<BR>
dev /<BR>
Line 188: Line 366:
To boot from a hard drive image:<BR>
To boot from a hard drive image:<BR>
boot hd:,\\:tbxi<BR>
boot hd:,\\:tbxi<BR>
=== Debugging qemu-system-ppc with GDB on an x86 Linux host ===
To build gdb-powerpc-linux on Linux, you need the normal build tools such as GCC installed.
Download the GDB source code. Version 7.9 is reported to work: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.gz
Unpack it and cd into the dir, then build and install with:
  ./configure -target=powerpc-linux --enable-sim-powerpc
  make && sudo make install
Launch qemu-system-ppc(64) with -s and -S. Qemu will pause and listen on port 1234 for GDB.
Set -prom-env "auto-boot?=false" --nographic on the command line for the Qemu instance to be debugged.
  qemu-system-ppc -s -S -prom-env "auto-boot?=false" --nographic
Open another terminal and launch the GDB you just built:
  gdb-powerpc-linux
  target remote localhost:1234
  continue
You can set a breakpoint in GDB, like this:
  break *0x20dccc
Type "boot" in the terminal running Qemu.


== Emulated hardware issues ==
== Emulated hardware issues ==
=== Mac OS ===
=== Mac OS ===
Only Mac OS 9 supports sound well. Use an experimental build.  
-Only Mac OS 9.x support sound well. Use an experimental build.<br>
-Mac OS 9.x will not boot with 64 Mb or less memory. They will also not boot with more than 1024 Mb.<br>


== Links ==
== Links ==
Installation images: <BR>
[http://cdimage.ubuntu.com/lubuntu/releases/14.04/release/lubuntu-14.04.5-desktop-powerpc.iso Lubuntu 14.04 PPC release]<BR>
[http://iso.linuxquestions.org/download/451/1507/http/download.opensuse.org/openSUSE-11.0-DVD-ppc.iso OpenSuse 11 PPC release]<BR>
[https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/12/Fedora/ppc/iso/Fedora-12-ppc-DVD.iso Fedora 12 PPC release]<BR>
[http://cdimage.ubuntu.com/ubuntu-mate/releases/16.04.4/release/ubuntu-mate-16.04.1-desktop-powerpc.iso Ubuntu Mate 16.04 PPC release] <BR>
[http://nappe.acc.umu.se/mirror/cdimage/ports/10.0/powerpc/iso-cd/debian-10.0-powerpc-NETINST-1.iso Debian 10 PPC release]<br>
[http://dl.sda1.eu/linux/yellowdog/yellowdog-6.2-ppc-DVD_20090629.iso Yellow Dog Linux 6.2]<br>
[http://www.emaculation.com/forum/viewtopic.php?f=34&t=7047&sid=67661b0a18610c86b115cdff98d68010 Google Summer of Code Discussion for Mac OS 9]<BR>
[http://www.emaculation.com/forum/viewtopic.php?f=34&t=7047&sid=67661b0a18610c86b115cdff98d68010 Google Summer of Code Discussion for Mac OS 9]<BR>
[http://www.macgui.com/downloads/?file_id=22125 Macsbug 6.6.3] - debugger for Mac OS 9<BR>
[http://www.macgui.com/downloads/?file_id=22125 Macsbug 6.6.3] - debugger for Mac OS 9<BR>
Line 203: Line 416:
[http://lowendmac.com/1999/power-mac-g4-sawtooth/ Sawtooth Power Mac G4 info]<br>
[http://lowendmac.com/1999/power-mac-g4-sawtooth/ Sawtooth Power Mac G4 info]<br>
<BR>
<BR>
== Pictures ==
== Pictures ==
[[File:ProjectBuilder.png|300px|Project Builder running inside of QEMU]]<span style="margin:20px;"></span>
[[File:ProjectBuilder.png|300px|Project Builder running inside of QEMU]]<span style="margin:20px;"></span>
Line 210: Line 424:
[[File:MacOS9_with_Graphing_Calculator.png|300px|Mac OS 9 with Graphing Calculator running]]<span style="margin:20px;"></span>
[[File:MacOS9_with_Graphing_Calculator.png|300px|Mac OS 9 with Graphing Calculator running]]<span style="margin:20px;"></span>
[[File:Doom_running_in_Mac_OS_9.png|300px|Doom running in Mac OS 9.2]]<BR>
[[File:Doom_running_in_Mac_OS_9.png|300px|Doom running in Mac OS 9.2]]<BR>
 
[[File:OpenSUSE.png|300px|OpenSUSE]]<BR>
<BR>
<BR>



Latest revision as of 19:36, 17 February 2024

PowerPC Emulator (32-bit)

Description

This page is about qemu-system-ppc. Note: Information below true for qemu-system-ppc builds as of 14-03-2019

The following machines are emulated through qemu-system-ppc:

Machine model selectorProvides
-M g3beige Heathrow based PowerMAC (default)
-M mac99 Mac99 based PowerMAC
-M 40p IBM RS/6000 7020 (40p)
-M bamboo Bamboo
-M mpc8544ds Mpc8544ds
-M none Empty machine
-M ppce500 Generic paravirt e500 platform
-M prep PowerPC PREP platform (deprecated in favour of the 40p machine )
-M ref405ep Ref405ep
-M amigaone Eyetech AmigaOne/Mai Logic Teron
-M sam460ex aCube Sam460ex
-M virtex-ml507 Xilinx Virtex ML507 reference design

Build directions

 ./configure --target-list=ppc-softmmu && make

Due to mouse issues when using the default GTK GUI in Windows, it is advisable to use the SDL-based GUI when compiling on/for that platform:

 ./configure --target-list=ppc-softmmu --enable-sdl && make

Pre-built binaries for Windows and OSX

Pre-built binaries for Windows can be found here: https://qemu.weilnetz.de/w64/
Pre-built binaries for OSX are provided at the emaculation website: https://www.emaculation.com/forum/viewtopic.php?f=34&t=8848
Experimental builds for Windows/OSX with e.g., sound support are provided at the emaculation website: https://www.emaculation.com/forum/viewtopic.php?f=34&t=8848&p=52102#p52104 and here: https://www.emaculation.com/forum/viewtopic.php?f=34&t=9028

Additional guides

Some guides detailing running Mac OS/ OS X or Amiga-like OSes are available off-site:
https://www.emaculation.com/doku.php/qemu/
http://zero.eik.bme.hu/~balaton/qemu/amiga/

PowerMac G4 and G3 emulation

PowerPC Mac G4 (Mac Model PowerPC3,1) and PowerPC Mac G3 emulation

The PowerPC Mac G4 -m mac99 machine model selector has three options:

Machine model selector optionsProvides
-M mac99,via=pmu pmu power management, providing USB mouse and keyboard
-M mac99,via=pmu-adb pmu power management with adb bus for older OSs not supporting USB
-M mac99,via=cuda cuda power management with adb bus (this is the default)

Optional commands:

Optional commandsDefaultProvides
-prom-env "auto-boot?=true"yesAutomatic boot at openbios prompt
-prom-env "boot-args=-v" noVerbose start-up of OSX guests
-prom-env "vga-ndrv?=true" yesOn the fly resolution/colour depth switching for Mac OS/OS X guests
-device VGA,edid=on noProvides additional screen resolutions for Mac OS/OS X guests

Mac OS/OSX and Linux guest compatibility

Operating systemStatusRemarks
Mac OS 8.0 to 8.6Not supported
Mac OS 9.0Boots, installs, runsRequires 9.0.4 with rom version 5.2.1 and above (e.g., 9.0.4 for the Cube)
Mac OS 9.1Boots, installs, runs
Mac OS 9.2Boots, installs, runs
Mac OS 10.0Boots, installs, runs
Mac OS 10.1Boots, installs, runs
Mac OS 10.2Boots, installs, runs
Mac OS 10.3Boots, installs, runs
Mac OS 10.4Boots, installs, runs
Mac OS 10.5Boots, installs, runsRequires -m mac99,via=pmu to run
Mac OSX Server 1.2v3Boots, installs, runsNo networking due to lack of gigabit ethernet support
Lubuntu 14Boots, installs, runsRequires -g 1024x768x8 to see text while installing
Fedora 12Boots, installs, runsRequires -g 1024x768x8 to see text while installing
Debian 10Boots, installs, runsRequires -g 1024x768x8 to see text while installing
OpenSuse 11Boots, installs, runsRequires -device rtl8139 for networking, -g 1024x768x8 to see text while installing
Yellow Dog Linux 6.2Boots, installs, runsRequires -device rtl8139 for networking, -g 1024x768x8 to see text while installing

Guest installation instructions

Mac OS 9.x to Mac OS X 10.4

Command-line options to install Mac OS:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99 -m 512 -hda <hd image file> -cdrom <iso file of installation media> 

Command-line options to run Mac OS:

 ./qemu-system-ppc -L pc-bios -boot c -M mac99 -m 512 -hda <hd image file>

Mac OS X 10.5

Command-line options to install Mac OS X 10.5:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -hda <hd image file> -cdrom <iso file of installation media>

Command-line options to run Mac OS X 10.5:

 ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 512 -hda <hd image file>

Mac OS X Server 1.2v3

Installation requires several steps. Only use an .img HD, qcow2 will not work:
Step 1: boot from installation CD, use disk utility to partition disk as Apple Server, start the installation and let it fail. Quit Qemu and reboot with command line in step 2.

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu-adb -m 256 -net none -prom-env "auto-boot?=true"  -prom-env "boot-args=-v" \
 -cdrom OSXServer1.2v3.iso -hda OSXServer1.2v3.img

Step 2: initial installation (note machine and CPU, otherwise no desktop is shown).

 ./qemu-system-ppc -L pc-bios -boot d -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=false" -net none \
 -hda OSXServer1.2v3.img -cdrom OSXServer1.2v3.iso

At the boot prompt enter "boot cd:9,\\:tbxi" Initial installation starts. Quit Qemu after completion.

Step 3: Installation continued. Boot with the following command line to complete the installation.

 ./qemu-system-ppc -L pc-bios -boot c -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none \
 -hda OSXServer1.2v3.img -cdrom OSXServer1.2v3.iso

Step 4: Boot the installed system:

 ./qemu-system-ppc -L pc-bios -boot c -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none \
 -hda OSXServer1.2v3.img -cdrom OSXServer1.2v3.iso

Lubuntu 14

Installation:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
 -hda lubuntu14.qcow2 -cdrom lubuntu-14.04.5-desktop-powerpc.iso

Running:

 ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
 -M mac99,via=pmu -m 1024 -hda lubuntu14.qcow2

Fedora 12

Installing:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
 -hda fedora12.qcow2 -cdrom Fedora-12-ppc-DVD.iso -g 1024x768x16 

Running:

 ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
 -M mac99,via=pmu -m 1024 -hda fedora12.qcow2 -g 1024x768x32

Debian 10 (Buster)

Note: To get a graphical desktop, at software selection, remove the default desktop environment and install only Xfce
Installing:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
 -hda debian10.qcow2 -cdrom debian-10.0-powerpc-NETINST-1.iso -g 1024x768x8

Running:

 ./qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
 -M mac99,via=pmu -m 1024 -hda debian10.qcow2 -g 1024x768x32

At the Linux boot prompt enter "Linux modprobe.blacklist=bochs_drm"

Pre-installed images of Debian 6 (Squeeze) and 7 (Wheezy) (both minimal and with desktop) can be found here: https://people.debian.org/~aurel32/qemu/powerpc/

These images boot with:

 ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 1024 \
 -hda debian_wheezy_powerpc_desktop.qcow2 -g 1024x768x32

OpenSuse 11

Installing:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 512 -net nic,model=rtl8139 \
 -net user -hda opensuse11.qcow2 -cdrom opensuse11.iso -g 1024x768x16 

Once the license screen appears, press Ctrl-Alt-Shift-X to open a terminal. Follow https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer to create partitions with pdisk. Write the map after partitioning and continue with Yast. Once Yast arrives at partitioning, select Expert partitioning, select the Hard disk and click Rescan disk.
Leave hda2 as it is.
Edit hda3 to format as Ext2, mount at /boot and set fstab option to: Mount in /etc/fstab by to Device Path (instead of Device ID)
Edit hda4 to format as Swap and set fstab option to: Mount in /etc/fstab by to Device Path (instead of Device ID)
Edit hda5 to format as Ext3, mount at / and set fstab option to: Mount in /etc/fstab by to Device Path (instead of Device ID)

Accept the partitioning and continue with formatting. Continue installing. There will be an error while the boot manager is being installed. Ignore it, do not retry and wait for the installation to finish and the system reboots. Quit Qemu at the openbios screen and edit your command line:

 ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 512 -net nic,model=rtl8139 \
 -net user -hda opensuse11.qcow2 -cdrom opensuse11.iso -g 1024x768x32

Yellow Dog Linux 6.2

Installing:

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu -m 1024 \
 -netdev user,id=network01 -device rtl8139,netdev=network01 \
 -cdrom <installation-image> -hda <hard disk image> -g 1024x768x16

Running:

 ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu -m 1024 \
 -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" \
 -netdev user,id=network01 -device rtl8139,netdev=network01 \
 -hda <hard disk image> -g 1024x768x16

IBM RS/6000 7020 (40p)

The 40p machine can be booted with the sandalfoot zImage from: http://www.juneau-lug.org/zImage.initrd.sandalfoot

Booting:

 ./qemu-system-ppc -M 40p -cdrom zImage.initrd.sandalfoot -boot d


Bamboo

 ./qemu-system-ppc -m bamboo

Mpc8544ds

 ./qemu-system-ppc -m mpc8544ds

Empty machine

 ./qemu-system-ppc -m none

Generic paravirt e500 platform

 ./qemu-system-ppc -m ppce500

PowerPC PREP platform (deprecated in favour of the 40p machine)

 ./qemu-system-ppc -m prep

Ref405ep

 ./qemu-system-ppc -m ref405ep

Eyetech AmigaOne/Mai Logic Teron

The AmigaNG boards (amigaone, pegasos2, sam460ex) are primarily used for running Amiga-like OSes (AmigaOS 4, MorphOS and AROS) but these can also run Linux.

Eyetech AmigaOne/Mai Logic Teron (amigaone) The amigaone machine emulates an AmigaOne XE mainboard by Eyetech which is a rebranded Mai Logic Teron board with modified U-Boot firmware to support AmigaOS 4.

Emulated devices:

* PowerPC 7457 CPU (can also use``-cpu g3, 750cxe, 750fx`` or ``750gx``)
* Articia S north bridge
* VIA VT82C686B south bridge
* PCI VGA compatible card (guests may need other card instead)
* PS/2 keyboard and mouse

To boot, a modified U-Boot binary is needed. While released under GPL, its source is lost so it cannot be included in QEMU. A binary is available at https://www.hyperion-entertainment.com/index.php/downloads?view=files&parent=28. The ROM image is in the last 512kB of the file, which, on a linux host, can be extracted with the command:

 tail -c 524288 updater.image > u-boot-amigaone.bin

The BIOS emulator in the firmware is unable to run QEMU‘s standard vgabios so VGABIOS-lgpl-latest.bin is needed instead. This can be downloaded from http://www.nongnu.org/vgabios.

You can find some Linux images that work on the amigaone machine at the following link: https://sourceforge.net/projects/amigaone-linux/files/debian-installer/

Booting:

 ./qemu-system-ppc -machine amigaone -bios u-boot-amigaone.bin \
 -cdrom "A1 Linux Net Installer.iso" \
 -device ati-vga,model=rv100,romfile=VGABIOS-lgpl-latest.bin

From the firmware menu that appears select Boot sequence, Amiga Multiboot Options and set Boot device 1 to Onboard VIA IDE CDROM. Then hit escape until the main screen appears, hit escape once more and from the exit menu select either Save settings and exit or Use settings for this session only. It may take a long time loading the kernel into memory but eventually it boots and the installer becomes visible. The ati-vga RV100 emulation is not complete yet so only frame buffer works, DRM and 3D is not available.

aCube Sam460ex

Booting:

 ./qemu-system-ppc -machine sam460ex -rtc base=localtime \
 -drive if=none,id=cd,file=Sam460InstallCD-53.58.iso,format=raw \
 -device ide-cd,drive=cd,bus=ide.1

Xilinx Virtex ML507 reference design

 ./qemu-system-ppc -m virtex-ml507

Debugging tips

Command line options

 -d unimp,guest_errors

(logs unimplemented features and guest errors to stdout)

 -trace 'pmu_*'

(logs all PMU accesses to stdout)

 -trace 'usb*'

(logs all USB accesses to stdout)

Macsbug

Macsbug can be used with Mac OS guest to tell you what exactly stopped booting. The link for it is below.
Mac OS 9.2 comes with a built-in debugger. To use it, set the OpenBIOS variable &#147;APPL,debug&#148;:

Via QEMU's command-line options:

 -prom-env aapl,debug=2000000

In OpenBIOS type:
dev /
2000000 encode-int *Note: the number can be replaced with the many options available
&#147; AAPL,debug&#148; property
then to boot from a cd type:
boot cd:,\\:tbxi

To boot from a hard drive image:
boot hd:,\\:tbxi

Debugging qemu-system-ppc with GDB on an x86 Linux host

To build gdb-powerpc-linux on Linux, you need the normal build tools such as GCC installed. Download the GDB source code. Version 7.9 is reported to work: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.gz Unpack it and cd into the dir, then build and install with:

 ./configure -target=powerpc-linux --enable-sim-powerpc
 make && sudo make install

Launch qemu-system-ppc(64) with -s and -S. Qemu will pause and listen on port 1234 for GDB. Set -prom-env "auto-boot?=false" --nographic on the command line for the Qemu instance to be debugged.

 qemu-system-ppc -s -S -prom-env "auto-boot?=false" --nographic

Open another terminal and launch the GDB you just built:

 gdb-powerpc-linux
 target remote localhost:1234
 continue

You can set a breakpoint in GDB, like this:

 break *0x20dccc

Type "boot" in the terminal running Qemu.

Emulated hardware issues

Mac OS

-Only Mac OS 9.x support sound well. Use an experimental build.
-Mac OS 9.x will not boot with 64 Mb or less memory. They will also not boot with more than 1024 Mb.

Links

Installation images:
Lubuntu 14.04 PPC release
OpenSuse 11 PPC release
Fedora 12 PPC release
Ubuntu Mate 16.04 PPC release
Debian 10 PPC release
Yellow Dog Linux 6.2

Google Summer of Code Discussion for Mac OS 9
Macsbug 6.6.3 - debugger for Mac OS 9
Darwin OS installation iso file
JQEMU - graphical manager for QEMU (requires Java)
PowerPC Assembly Language Tutorial
QEMU PowerPC mailing list
Beige Power Mac G3 info
Sawtooth Power Mac G4 info

Pictures

Project Builder running inside of QEMU Pong 2001 Carbon

Norton Utilities Host and Guest About Dialogs
Mac OS 9 with Graphing Calculator running Doom running in Mac OS 9.2
OpenSUSE

How do I help

QEMU has many systems that can always be improved. Here is a brief list of possible areas you may want to work on:

  • Documentation
  • Testing
  • Fixing operating system compatibility issues
  • PowerPC emulation
  • User interface
  • OpenBIOS (firmware)
  • Implement a 3D video card
  • Improve various hardware (via-cuda, ata controller, etc..)


Knowledge in these areas could help:

  • PowerPC Assembly
  • 68K Assembly
  • Embedded Programming

Contacts

Maintainer: David Gibson david@gibson.dropbear.id.au
If there are any issues with this page, please contact me