Documentation/Platforms/PowerPC

From QEMU

PowerPC Macintosh Emulator

Description

An emulator of the Apple Beige Power Mac G3 and Sawtooth Power Mac G4.

Hardware options

Recent builds of qemu-system-ppc default to emulating a PowerPC Mac G4, Mac Model PowerPC3,1.
The machine model selector on the command line (-m) has three options:

Machine model selectorProvides
-m mac99,via=pmu pmu power management, providing USB mouse and keyboard (this is the default)
-m mac99,via=pmu-adb pmu power management with adb bus for older OSs not supporting USB
-m mac99,via=cuda cuda power management with adb bus, not well supported

Guest Compatibility


Note: information true for qemu-system-ppc builds as of 23-06-2018

Operating SystemStatus
Mac OS 8.0 to 8.6Not supported
Mac OS 9.09.0.4 with rom version 5.6 and above (e.g., 9.0.4 for the Cube) boot and install.
Mac OS 9.1Boots and installs
Mac OS 9.2Boots and installs
Mac OS 10.0Boots and installs
Mac OS 10.1Boots and installs
Mac OS 10.2Boots and installs
Mac OS 10.3Boots and installs
Mac OS 10.4 Boots and installs
Mac OS 10.5 Boots and installs
Lubuntu 14Boots and installs
Fedora 12Boots and installs
Debian 10Boots and installs
OpenSuse 11Boots and installs

Build Directions

 ./configure --target-list=ppc-softmmu && make

Guest Installations

Mac OS/Mac OSX

Mac OS 9.x

Command-line options to install Mac OS 9:

 ./qemu-system-ppc -M mac99,via=pmu -m 512 -hda <hd image file> -cdrom <iso file of installation media> -boot d -netdev user,id=mynet0 -device sungem,netdev=mynet0

Mac OS 10.X

Command-line options to install Mac OS 10.X:

 ./qemu-system-ppc -M mac99,via=pmu -m 512 -hda <hd image file> -cdrom <iso file of installation media> -boot d -netdev user,id=mynet0 -device sungem,netdev=mynet0

Mac OS X Server 1.2v3

Installation requires several steps:
Step 1: boot from installation CD, use disk utility to partition disk as Apple Server, quit Qemu and reboot with command line in step 2.

 ./qemu-system-ppc -L pc-bios -boot d -M mac99,via=pmu-adb -m 256 -net none -prom-env "auto-boot?=true" -prom-env "vga-ndrv?=true" -prom-env "boot-args=-v" -sdl -cdrom OSXServer1.2v3.iso -hda OSXServer1.2v3.qcow2

Step 2: initial installation (note machine and CPU, otherwise no desktop is shown).

 ./qemu-system-ppc -L pc-bios -boot d -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=false" -net none -sdl -hda OSXServer1.2v3.qcow2 -cdrom OSXServer1.2v3.iso

At the boot prompt enter "boot cd:9,\\:tbxi" Initial installation starts. Quit Qemu after completion.

Step 3: Installation continued. Boot with the following command line to complete the installation.

 ./qemu-system-ppc -L pc-bios -boot c -M g3beige -cpu G3 -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none -sdl -hda OSXServer1.2v3.qcow2 -cdrom OSXServer1.2v3.iso

Step 4: Boot the installed system:

 ./qemu-system-ppc -L pc-bios -boot c -M mac99,via=pmu-adb -m 256 -prom-env "boot-args=-v" -prom-env "auto-boot?=true" -net none -sdl -hda OSXServer1.2v3.qcow2 -cdrom OSXServer1.2v3.iso

Linux

Lubuntu 14

Installation:

 qemu-system-ppc -L pc-bios -boot d -prom-env "vga-ndrv?=true" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda lubuntu14.qcow2 -cdrom lubuntu-14.04.5-desktop-powerpc.iso

Running:

 qemu-system-ppc -L pc-bios -boot c -prom-env "vga-ndrv?=true" -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda c:\Linux-disks\lubuntu14.qcow2 -cdrom c:\Linux-images\lubuntu-14.04.5-desktop-powerpc.iso

Fedora 12

Installing:

 ./qemu-system-ppc -L pc-bios -boot d -prom-env "vga-ndrv?=true" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda fedora12.qcow2 -cdrom Fedora-12-ppc-DVD.iso -g 1024x768x32 

Running:

 ./qemu-system-ppc -L pc-bios -boot c -prom-env "vga-ndrv?=true" -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda fedora12.qcow2 -g 1024x768x32

Debian 10

Note: does not get to desktop yet when running
Installing:

 ./qemu-system-ppc -L pc-bios -boot d -prom-env "vga-ndrv?=true" -prom-env "auto-boot?=true" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda debian10.qcow2 -cdrom debian-10.0-powerpc-NETINST-1.iso -g 1024x768x8

Running:

 ./qemu-system-ppc -L pc-bios -boot c -prom-env "vga-ndrv?=true" -prom-env "auto-boot?=true" -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 1024 -net nic,model=sungem -net user -sdl -hda debian10.qcow2 -g 1024x768x32

Pre-installed images of Debian Squeeze and Wheezy (both minimal and with desktop) can be found here: https://people.debian.org/~aurel32/qemu/powerpc/

OpenSuse 11

Installation of OpenSuse11:

 ./qemu-system-ppc -L pc-bios -boot d -prom-env "vga-ndrv?=true" -M mac99,via=pmu -m 512 -net nic,model=rtl8139 -net user -sdl -drive file=opensuse11.iso,format=raw,media=cdrom -drive file=opensuse11.qcow2,format=qcow2,media=disk -g 1024x768x16 

Once the license screen appears, press Ctrl-Alt-Shift-X to open a terminal. Follow https://en.opensuse.org/SDB:Install_openSUSE_on_an_Apple_PPC_computer to create partitions with pdisk. Write the map after partitioning and continue with Yast. Once Yast arrives at partitioning, select Expert partitioning, select the Hard disk and click Rescan disk.
Leave hdb2 as it is.
Edit hdb3 to format as Ext2, mount at /boot and set fstab option to: Mount in /etc/fstab by to Device Path (instead of Device ID)
Edit hdb4 to format as Swap and set fstab option to: Mount in /etc/fstab by to Device Path (instead of Device ID)
Edit hdb5 to format as Ext3, mount at / and set fstab option to: Mount in /etc/fstab by to Device Path (instead of Device ID)

Accept the partitioning and continue with formatting. Continue installing. There will be an error while the boot manager is installed. Ignore it, do not retry and wait for the installation to finish and the system reboots. Quit Qemu at the openbios screen and edit your command line:

 ./qemu-system-ppc -L pc-bios -boot c -prom-env "vga-ndrv?=true" -M mac99,via=pmu -m 512 -net nic,model=rtl8139 -net user -sdl -drive file=opensuse11.img,format=qcow2,media=disk,index=1 -g 1024x768x32

Mac OS 9 Debugging tips

Macsbug can be used to tell you what exactly stopped booting. The link for it is below.
Mac OS 9.2 comes with a built-in debugger. To use it, set the OpenBIOS variable &#147;APPL,debug&#148;:

Via QEMU's command-line options:

 -prom-env aapl,debug=2000000

In OpenBIOS type:
dev /
2000000 encode-int *Note: the number can be replaced with the many options available
&#147; AAPL,debug&#148; property
then to boot from a cd type:
boot cd:,\\:tbxi

To boot from a hard drive image:
boot hd:,\\:tbxi

Emulated hardware issues

Linux is able to use a wide variety of emulated hardware available to QEMU. Sound and networking devices work well with it.

Mac OS 9 and Mac OS X currently only support sound in experimental builds.

Links

Google Summer of Code Discussion for Mac OS 9
Macsbug 6.6.3 - debugger for Mac OS 9
Darwin OS installation iso file
JQEMU - graphical manager for QEMU (requires Java)
PowerPC Assembly Language Tutorial
QEMU PowerPC mailing list
Beige Power Mac G3 info
Sawtooth Power Mac G4 info

Pictures


Project Builder running inside of QEMU Pong 2001 Carbon

Norton Utilities Host and Guest About Dialogs
Mac OS 9 with Graphing Calculator running Doom running in Mac OS 9.2


How do I help

QEMU has many systems that can always be improved. Here is a brief list of possible areas you may want to work on:

  • Documentation
  • Testing
  • Fixing operating system compatibility issues
  • PowerPC emulation
  • User interface
  • OpenBIOS (firmware)
  • Implement a sound card that is compatible with Mac OS 9 and Mac OS X. The usb-audio device is the closest to working on the Mac OS.
  • Implement a 3D video card
  • Improve various hardware (via-cuda, ata controller, etc..)


Knowledge in these areas could help:

  • PowerPC Assembly
  • 68K Assembly
  • Embedded Programming

Contacts

Maintainer: David Gibson david@gibson.dropbear.id.au
If there are any issues with this page, please contact me