ChangeLog/3.0

Warning: unsupported host systems

Unsupported host setups are CPU and operating systems which we do not have access to and are thus unable to test. They will continue to work in this release (though configure will warn you about the unsupported status), but in a future QEMU release we may drop support for those hosts unless somebody volunteers to help us with maintaining them (and can provide build/CI machines).

This affects the OSes:

• GNU/kFreeBSD
• DragonFly BSD
• Solaris
• Haiku

System emulation

Incompatible changes

• Option "-no-kvm-pit-reinjection" has been removed. Use "-global kvm-pit.lost_tick_policy=discard" instead.
• Option "-no-kvm-irqchip" has been removed. Use "-machine kernel_irqchip=off" instead.
• The "vlan" parameter of the "-net" option has been removed. Use "-netdev" with IDs or the "hubport" netdev instead.
• The "xlnx-ep108" machine has been replaced by the "xlnx-zcu102" machine.
• The qemu-img "convert -s snapshot_id_or_name" argument has been removed. Use "convert -l snapshot_param" instead.
• PPC support for explicitly allocated RMAs has been removed (kernel support removed in 2015)

Deprecated options and features

• The "arch" output member of the "query-cpus-fast" command is deprecated. Use the "target" output member instead.
• Option "-virtioconsole" is deprecated, use "-device virtconsole" instead.
• The non-functional "-clock" option will be removed soon.
• The "pc-0.10" and "pc-0.11" machines are now deprecated. Use newer machine types instead.
• Option "-enable-hax" is deprecated. Use "-accel hax" instead.
• The "arch" memeber in the reply to query-cpus-fast is deprecated, use "target" instead.

Consult the "Deprecated Features" appendix for the full list of historically deprecated features/options.

Future incompatible changes

• Three options are using different names on the command line and in configuration file. In particular:
  • The "acpi" configuration file section matches command-line option "acpitable";
  • The "boot-opts" configuration file section matches command-line option "boot";
  • The "smp-opts" configuration file section matches command-line option "smp".

-readconfig will standardize on the name for the command line option.

• Behavior of automatic calculation of SMP topology when some SMP topology options for -smp are omitted (sockets, cores, threads) will change in the future. If guest ABI needs to be preserved on upgrades while using the SMP topology options, users should either set set all options explicitly (sockets, cores, threads), or omit all of them.
• Devices "allwinner-a10", "pc87312", "ssi-sd" will be configured with explicit properties instead of implicitly. This is unlikely to affect users.
• For x86, specifying a CPUID feature with both "+feature/-feature" and "feature=on/off" will cause a warning. The current behavior for this combination ("+feature/-feature" wins over "feature=on/off") will be changed so that "+feature" and "-feature" will be synonyms for "feature=on" and "feature=off" respectively).
• The read-only block drivers "bochs", "cloop" and "dmg" as well as "rbd" and "vvfat" in certain read-only configurations will no longer enable read-only mode automatically. It will be necessary to specify "read-only=on" explicitly on the command line and in QMP commands for the setup to keep working; the default "read-only=off" setting will result in an error.
• On s390x, using KVM with a Linux host kernel version < 3.15 has been broken since QEMU version 2.10. This will not be fixed unless a need is communicated (otherwise the code will be removed in the near future, so that you need at least Linux kernel version 3.15 on the host to run KVM on System z)

68k

• Fixes for several instructions: subx with memory, flognp1, fcos, fsin, fmod

ARM

• Support for emulating the SMMUv3 (IOMMU). One can be added to the "virt" board with the command line option "-machine iommu=smmuv3"
• Support for v8M VLLDM and VLSTM.
• Support for various missing instructions from the v8.2-FP16 state.

Microblaze

• Translation bug fixes.

PowerPC

• Add PMU support for mac99 machine selectable using via machine option (via=pmu or via=pmu-adb)
• Many improvements for the Uninorth PCI host bridge for Mac machine types
• POWER9 hash MMU support?

RISC-V

• Improvements for privileged ISA emulation.

s390

• add cpu model for the z14 Model ZR1 (the "small" z14)
• add bpb/ppa15 (spectre mitigation) features to default cpu model for z196 and later
• configuration of consoles via -serial is now supported
• s390-netboot now supports indirect loading via .INS files

TCG

• rework TOD handling and fix cpu hotplug

KVM

• vfio-ccw: add "force-orb-pfch" parameter
  • used to accommodate guests that do not set the "unlimited prefetch" flag in the request block (which is not supported by vfio-ccw), but actually work fine with the current vfio-ccw implementation
• remove unneeded calls to cpu_synchronize_state()

s390 firmware

• allow non-sequential entries in boot menu
• add support for indirect loading via .INS files in s390-netboot
• add support for pxelinux.cfg-style network booting

SPARC

• Add -icount support for sun4u

x86

• Formatting of CPU models and flags reported with '-cpu help' has improved readability
• New CPU model KnightsMill
• Support for the AMD TOPOEXT extension, to provide cache information for EPYC family processors.

KVM

• Support for Hyper-V reenlightenment MSRs with the 'hv-reenlightenment' CPU feature flag
• The 'ssbd', 'virt-ssbd', 'amd-ssbd' and 'amd-no-ssb' CPU feature flags are added in relation to the "Speculative Store Bypass" hardware vulnerability (CVE-2018-3639)

Device emulation and assignment

TPM

• TPM emulator backend migration support
• TPM TIS device migration support

GUI

• The F10 menubar key is now disabled in the GTK+ front-end.
• The SDL front-end supports OpenGL ES.

Migration

• Postcopy: The new 'max-postcopy-bandwidth' parameter can be used to limit the bandwidth during the postcopy phase of a migrate; it was previously unlimited.

Miscellaneous

• Command line option values greater than 1024 bytes in length are no longer silently truncated.

User-mode emulation

• make docker-binfmt-image-debian-NAME can be used to build user-mode images. For example:

   make docker-binfmt-image-debian-ubuntu-bionic-arm64 \
     DEB_ARCH=arm64 DEB_TYPE=bionic DEB_URL=http://ports.ubuntu.com \
     EXECUTABLE=./aarch64-linux-user/qemu-aarch64 V=1

• PPC64 host fixes (page size, mmap alignment, interrupted syscall, F_*LK64)

• Fixes for several syscalls: mmap with 0 length, setsockopt, netlink
• new syscalls: swapcontext (ppc), get_tls (ARM)
• Most errors are now affected by -d rather than just dumped to stderr
• qemu-binfmt-conf.sh: new options to use persistent (F) flag, ignore the OS/ABI field
• add support of FDPIC for ARM
• Support for ARM's Scalable Vector Extensions

TCG

• New build target "check-tcg" will run cross-architecture tests

Build Information

Build Dependencies

• The minimum acceptable version of GLib is increased from 2.22 to 2.40
• RISC-V emulation requires libfdt.
• A set of rules declaring intentions for supported build target operating systems has been defined https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Known issues

• see Planning/3.0