ChangeLog/3.0

Warning: unsupported host systems

Unsupported host setups are CPU and operating systems which we do not have access to and are thus unable to test. They will continue to work in this release (though configure will warn you about the unsupported status), but in a future QEMU release we may drop support for those hosts unless somebody volunteers to help us with maintaining them (and can provide build/CI machines).

This affects the OSes:

• GNU/kFreeBSD
• DragonFly BSD
• Solaris
• Haiku

System emulation

Incompatible changes

• Option "-no-kvm-pit-reinjection" has been removed. Use "-global kvm-pit.lost_tick_policy=discard" instead.
• Option "-no-kvm-irqchip" has been removed. Use "-machine kernel_irqchip=off" instead.
• The "vlan" parameter of the "-net" option has been removed. Use "-netdev" with IDs or the "hubport" netdev instead.
• The deprecated -drive options "geometry", "addr" and "serial" have been removed. Use "-drive if=none" and pass the options to "-device" instead.
• The "xlnx-ep108" machine has been replaced by the "xlnx-zcu102" machine.
• The qemu-img "convert -s snapshot_id_or_name" argument has been removed. Use "convert -l snapshot_param" instead.
• PPC support for explicitly allocated RMAs has been removed (kernel support removed in 2015).
• The default for VFIO's "display" option has been changed from "auto" to "off", because "auto" requires an OpenGL-compatible configuration for vGPUs that require GL support.
• The deprecated xlnx-ep108 machine was removed.

Deprecated options and features

• The "arch" output member of the "query-cpus-fast" command is deprecated. Use the "target" output member instead.
• Option "-virtioconsole" is deprecated, use "-device virtconsole" instead.
• The non-functional "-clock" option will be removed soon.
• The "pc-0.10" and "pc-0.11" machines are now deprecated. Use newer machine types instead.
• Option "-enable-hax" is deprecated. Use "-accel hax" instead.
• The "arch" memeber in the reply to query-cpus-fast is deprecated, use "target" instead.

Consult the "Deprecated Features" appendix for the full list of historically deprecated features/options.

Future incompatible changes

• Three options are using different names on the command line and in configuration file. In particular:
  • The "acpi" configuration file section matches command-line option "acpitable";
  • The "boot-opts" configuration file section matches command-line option "boot";
  • The "smp-opts" configuration file section matches command-line option "smp".

-readconfig will standardize on the name for the command line option.

• Behavior of automatic calculation of SMP topology when some SMP topology options for -smp are omitted (sockets, cores, threads) will change in the future. If guest ABI needs to be preserved on upgrades while using the SMP topology options, users should either set set all options explicitly (sockets, cores, threads), or omit all of them.
• Devices "allwinner-a10", "pc87312", "ssi-sd" will be configured with explicit properties instead of implicitly. This is unlikely to affect users.
• For x86, specifying a CPUID feature with both "+feature/-feature" and "feature=on/off" will cause a warning. The current behavior for this combination ("+feature/-feature" wins over "feature=on/off") will be changed so that "+feature" and "-feature" will be synonyms for "feature=on" and "feature=off" respectively).
• The read-only block drivers "bochs", "cloop" and "dmg" as well as "rbd" and "vvfat" in certain read-only configurations will no longer enable read-only mode automatically. It will be necessary to specify "read-only=on" explicitly on the command line and in QMP commands for the setup to keep working; the default "read-only=off" setting will result in an error.
• On s390x, using KVM with a Linux host kernel version < 3.15 has been broken since QEMU version 2.10. This will not be fixed unless a need is communicated (otherwise the code will be removed in the near future, so that you need at least Linux kernel version 3.15 on the host to run KVM on System z)

68k

• Fixes for several instructions: subx with memory, flognp1, fcos, fsin, fmod

ARM

• Support for emulating the SMMUv3 (IOMMU). One can be added to the "virt" board with the command line option "-machine iommu=smmuv3"
• Support for v8M VLLDM and VLSTM.
• Support for various missing instructions from the v8.2-FP16 state.
• The aspeed machine now includes I2C RTC and EEPROM devices
• Support for a new machine witherspoon-bmc
• The ECAM region in the virt machine type is now 256MiB big, so that more PCI devices can be added.
• The virt machine type supports up to 512 CPUs.
• The xlnx-zynqmp machine uses a Cortex-R5F CPU rather than a Cortex-R5.

Microblaze

• Translation bug fixes.
• Support for 64-bit address sizes.

PowerPC

• Add PMU support for mac99 machine selectable using via machine option (via=pmu or via=pmu-adb)
• Many improvements for the Uninorth PCI host bridge for Mac machine types
• POWER9 hash MMU support?
• Many improvements for Sam460ex, 40p (PReP) and Macintosh machines.

RISC-V

• Improvements for privileged ISA emulation.

s390

• add cpu model for the z14 Model ZR1 (the "small" z14)
• add bpb/ppa15 (spectre mitigation) features to default cpu model for z196 and later
• configuration of consoles via -serial is now supported
• s390-netboot now supports indirect loading via .INS files

TCG

• rework TOD handling and fix cpu hotplug

KVM

• vfio-ccw: add "force-orb-pfch" parameter
  • used to accommodate guests that do not set the "unlimited prefetch" flag in the request block (which is not supported by vfio-ccw), but actually work fine with the current vfio-ccw implementation
• remove unneeded calls to cpu_synchronize_state()

s390 firmware

• allow non-sequential entries in boot menu
• add support for indirect loading via .INS files in s390-netboot
• add support for pxelinux.cfg-style network booting

SPARC

• Add -icount support for sun4u

x86

• Formatting of CPU models and flags reported with '-cpu help' has improved readability
• New CPU model KnightsMill
• Support for the AMD TOPOEXT extension, to provide cache information for EPYC family processors.
• SVM emulation supports NMI interception and NPT.

KVM

• Support for Hyper-V reenlightenment MSRs with the 'hv-reenlightenment' CPU feature flag
• The 'ssbd', 'virt-ssbd', 'amd-ssbd' and 'amd-no-ssb' CPU feature flags are added in relation to the "Speculative Store Bypass" hardware vulnerability (CVE-2018-3639)

Device emulation and assignment

Block devices

• Many fixes to AHCI emulation.

Graphics

• New device "bochs-display", a PCI framebuffer that is configured via the Bochs DISPI interface (basically -device VGA without legacy VGA emulation, text mode, low memory VRAM, etc.).
• New device "ramfb", a simple framebuffer that lives in guest RAM and is configured via fw_cfg.
• Many improvements to the sm501 device.

SCSI

• The SCSI subsystem can now be left out.
• QEMU can modify the VPD block limits page of a passthrough device, so that it also takes into account the host controller's limits.

TPM

• The TPM emulator and the TPM TIS device now support migration

Character devices

• Unix sockets are deleted after close.

Crypto subsystem

• Support for TLS Pre-Shared Keys using "--object tls-creds-psk". The pre-shared key file can be created with "psktool -u qemu -p /path/to/file.psk".

GUI

• The F10 menubar key is now disabled in the GTK+ front-end.
• The SDL front-end supports OpenGL ES.

Monitor

• A new set of monitor commands "job-*" supersedes the older "block-job-*", and will be generalized in the future to jobs that do not involve block devices.
• Support for a new experimental virtual machine run state, "preconfig". When QEMU is started with the "-preconfig" command line option, only a limited number of configuration and query commands can be invoked from the monitor. This is required to avoid backwards incompatibility and allow more flexibility in configuration, because some configuration commands do not make sense on a fully initialized virtual machine. Preconfiguration mode is left with the new "x-exit-preconfig" command.

Migration

• Postcopy: The new 'max-postcopy-bandwidth' parameter can be used to limit the bandwidth during the postcopy phase of a migrate; it was previously unlimited.
• Support for recovery of postcopy migration after a network failure, using the "migrate_recover" monitor command (migrate-recover on QMP).
• New command "migrate_pause" (migrate-pause on QMP)

Network

• SLIRP now disables Nagle algorithm, thus improving latency. The guest is going to use Nagle algorithm when useful.

Block devices and tools

• Support for "active" mirror using the new option "copy-mode" to the "drive-mirror" monitor option.
• Support for copy offloading in "qemu-img convert", with the "-C" option. Note that copy offloading disables detection of sparse images.
• qemu-io now exits with an error when a command failed.
• New experimental monitor commands x-block-dirty-bitmap-merge, x-block-dirty-bitmap-enable, x-block-dirty-bitmap-disable
• The current state (connected/disconnected) of a persistent reservation manager is reported via QMP events and can be queried with the "query-pr-managers" QMP command.

Miscellaneous

• Command line option values greater than 1024 bytes in length are no longer silently truncated.

User-mode emulation

• make docker-binfmt-image-debian-NAME can be used to build user-mode images. For example:

   make docker-binfmt-image-debian-ubuntu-bionic-arm64 \
     DEB_ARCH=arm64 DEB_TYPE=bionic DEB_URL=http://ports.ubuntu.com \
     EXECUTABLE=./aarch64-linux-user/qemu-aarch64 V=1

• PPC64 host fixes (page size, mmap alignment, interrupted syscall, F_*LK64)

• Fixes for several syscalls: mmap with 0 length, setsockopt, netlink
• new syscalls: swapcontext (ppc), get_tls (ARM)
• Most errors are now affected by -d rather than just dumped to stderr
• qemu-binfmt-conf.sh: new options to use persistent (F) flag, ignore the OS/ABI field
• add support of FDPIC for ARM
• Support for ARM's Scalable Vector Extensions

TCG

• New option "-d fpu" to log FPU state.
• New build target "check-tcg" will run cross-architecture tests
• The translation block lock was removed to improve scalability.

Guest agent

• Support for entering power saving modes (hibernate/suspend/hybrid sleep) via systemctl rather than pmutils.

Build Information

Build Dependencies

• The minimum acceptable version of GLib is increased from 2.22 to 2.40
• RISC-V emulation requires libfdt.
• A set of rules declaring intentions for supported build target operating systems has been defined https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
• QEMU's build process is now compatible with Python 3. Support for Python 2.6 and earlier however has been dropped.

Known issues

• see Planning/3.0